Home > Baseline Management > Enable or Disable Auto-Alignment
Export to PDFEnable or Disable Auto-Alignment
You can enable auto-alignment for tenants, which reduces manual effort required for troubleshooting unintended configuration changes.
To enable auto-alignment for a tenant, on the Tenants page, select the tenant and click Manage > Enable auto-alignment. After a scheduled drift detection job detects configuration deviations between the tenant and baseline configurations, an auto-alignment job will automatically start immediately to revert configuration updates, ensuring alignment with the deployed baseline standards. After a scheduled drift detection job detects configuration deviations between the tenant and baseline configurations, an auto-alignment job will automatically start immediately to correct configuration updates, ensuring alignment with the deployed baseline standards. After the auto-alignment job is complete, you can navigate to Process center to view the auto-alignment results.
Removed or added configurations will not be impacted by this automation, and manual review is still required for such modifications, ensuring intentional changes are not blindly corrected.
To disable auto-alignment to a tenant, on the Tenants page, select the tenant and click Manage >Disable auto-alignment. Once disabled, configuration deviations identified during drift detection will no longer be automatically corrected to align with the deployed baseline standards.
If auto-alignment is enabled for a tenant, an Auto-alignment enabled tag will appear next to the tenant name.
If auto-alignment is disabled for a tenant, a Monitor only tag will appear next to the tenant name.